Foxnet University · Free
Practical labs
Browser simulations for the calculations and checks security engineers make every week: subnets, bitrate, storage, PoE, door logic, reader wiring, power and fire alarm faults.
Progress is saved only in this browser.
IP subnet planner
Work out a subnet from its CIDR, count usable hosts and carve camera VLANs out of an address block.
Camera bitrate & bandwidth
Estimate a camera stream from resolution, frame rate, codec and scene, then total it against an uplink.
NVR storage sizing
Cameras × bitrate × hours × days, with RAID overhead, to size recorder disks.
CCTV network builder
Place cameras, PoE switches and a recorder, connect them, and check each switch’s ports and PoE budget.
Access-control door logic
Fill in a truth table of door states and the events a controller reports.
Reader wiring: Wiegand and OSDP
Match reader conductors to controller terminals for Wiegand and OSDP (RS-485) readers.
Power budgeting
PoE classes against a switch budget, battery backup hours and a fire panel standby battery.
Fire alarm fault-finding
Read panel indications on an addressable loop and pick the likely fault and first check.
Talk to an engineer
Not sure which service fits?
Tell us what you are working on. A Foxnet engineer will point you to the right session, book or request — or tell you honestly if you do not need one.
